Easy Configuration: Using PC31 without Cloud Management
  •                     
                                

✴  Insert SIM. (Pronto SIM and a number of other are detected automatically) 

             

✴  Connect antennas to WIFI and 4G connectors 

                            

✴  Connect WAN port to Internet if available 

                        

✴  Connect Power adapter 

                               

PC-31 will power up and start broadcasting 2 SSIDs, one each for 2.4GHz and 5GHz bands. Default passphrase is unique to each router and printed at the bottom of the router. Wired devices can be connected to LAN ports of router 

                               

After few minutes, router will establish a 4G connection as well as connection to wired internet. WIFI and LAN connected devices can now get Internet access. When WAN connection drops, router will automatically failover to 4G. When WAN comes back up, router will default back to WAN internet. 

                            


While most 4G APN are detected automatically, you can choose your own by connecting to local GUI of the router by following steps below

  • Connect PC to LAN port and point browser to 192.168.190.1
  • Username “root” and Password is last 3 octets of MAC address like 11:22:33 (as printed on bottom label)
  • Select Uplink Mode as “Mobile Broadband” , Your Country, Operator and a suggested APN will appear. You can override this with a new APN

FOR DETAILED CONFIGURATION USING CLOUD CONTROLLER USE ATTACHED QUICK START GUIDE